The NAD 3100 Integrated amplifier is an absolute powerhouse of an amplifier with superb sound *SOLD*

Specifications, power amplifier
– 60W RMS [17dBW]
– Continuous power [min RMS per channel 20Hz – 20kHz, less than rated distortion into 8ohms]:
– Rated distortion [ THD, 20Hz – 20kHz ] 0.03%
– Clipping Power : 70W
– Dynamic headroom +6dB
– IHF Dynamic Power x 2 at 8 ohms: 200W, 4 ohms 250W, 2ohms 330W
– Damping Factor [8 ohms, 50Hz]: > 100
– Slew Rate > 35V / ?sec
– Input impedance : R = 10kohms, C = 600pF
– Input sensitivity at rated power : 850mV
– Signal to Noise ratio [1W / 60W, A-weighted]: 100dB / 117dB

Specifications, Preamplifier
– Phono input : Input impedance [R and C]: MM: 47kohms / 100pF, MC: 100ohms / 1000pF
– Input sensitivity [1kHz]: MM: 2.5mV [ref 0.5V], MC: 0.18mV
– Signal to noise ratio : MM: 75dB [ref 5mV], MC: 75dB [0.5mV]
– Total harmonic distortion : < 0.04% - Phono RIAA accuracy : +/- 0.5dB - Line level inputs : Input impedance [R and C]: 50kohms / 500pF - Input sensitivity [1W]: 20mV - Maximum input signal : 10V - Signal to noise ratio : 94dB - Frequency response [20Hz to 20kHz] : +/- 0.5dB - Line level outputs : Output impedance : Preamp: 600ohm, tape: source Z + 1kohm, max out pre: 10V - Tone controls: Treble: +/- 9dB at 10kHz, Bass: +/- 10dB at 50Hz, Bass EQ: +3dB at 55Hz and +6dB at 36Hz - Infrasonic filter : -3dB at 12Hz, 12 dB/octave [switchable] Bridged mono mode - 100W RMS [20dBW] - Dynamic headroom [IHF 8ohms] : +7dB - IHF dynamic power [maximum short term power per channel] : 8 ohm: 500W [27dBW], 4 ohms: 660W [28dBW] - Dimensions [ W x H x D ] : 435 x 106 x 385 mm - Weight : 10.4 kg